Wheel face and “V”-groove are machined from drop forged steel. A relief groove at the base of the “V” tends to equalize the load to each face of
the angle track when in operation. Wheel face and bore are machined for concentricity to proper tracking. These wheels can be used not only on a
track but flat surfaces as well.

VF0650120

VF0650120

Bearing Type:
Roller
Wheel Diameter:
6"
Tread Width:
3"
Capacity:
6000 lbs
View and Build Quote

VF0650120

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0650120 is a 6-inch drop forged steel V-Groove wheel with a roller bearing.

VF0650124

VF0650124

Bearing Type:
Roller
Wheel Diameter:
6"
Tread Width:
3"
Capacity:
6000 lbs
View and Build Quote

VF0650124

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0650124 is a 6-inch drop forged steel V-Groove wheel with a roller bearing.

VF0650916

VF0650916

Bearing Type:
Tapered Roller
Wheel Diameter:
6"
Tread Width:
3"
Capacity:
6500 lbs
View and Build Quote

VF0650916

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0650916 is a 6-inch drop forged steel V-Groove wheel with a tapered roller bearing.

VF0650920

VF0650920

Bearing Type:
Tapered Roller
Wheel Diameter:
6"
Tread Width:
3"
Capacity:
6500 lbs
View and Build Quote

VF0650920

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0650920 is a 6-inch drop forged steel V-Groove wheel with a tapered roller bearing.

VF0850116

VF0850116

Bearing Type:
Roller
Wheel Diameter:
8"
Tread Width:
3"
Capacity:
6000 lbs
View and Build Quote

VF0850116

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0850116 is a 8-inch drop forged steel V-Groove wheel with a roller bearing.

VF0870120

VF0870120

Bearing Type:
Roller
Wheel Diameter:
8"
Tread Width:
4"
Capacity:
8350 lbs
View and Build Quote

VF0870120

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0870120 is a 8-inch drop forged steel V-Groove wheel with a roller bearing.

VF0870124

VF0870124

Bearing Type:
Roller
Wheel Diameter:
8"
Tread Width:
4"
Capacity:
8350 lbs
View and Build Quote

VF0870124

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0870124 is a 8-inch drop forged steel V-Groove wheel with a roller bearing.

VF0870916

VF0870916

Bearing Type:
Tapered Roller
Wheel Diameter:
8"
Tread Width:
4"
Capacity:
10000 lbs
View and Build Quote

VF0870916

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0870916 is a 8-inch drop forged steel V-Groove wheel with a tapered roller bearing.

VF0870920

VF0870920

Bearing Type:
Tapered Roller
Wheel Diameter:
8"
Tread Width:
4"
Capacity:
10000 lbs
View and Build Quote

VF0870920

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF0870920 is a 8-inch drop forged steel V-Groove wheel with a tapered roller bearing.

VF1050116

VF1050116

Bearing Type:
Roller
Wheel Diameter:
10"
Tread Width:
3"
Capacity:
5000 lbs
View and Build Quote

VF1050116

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF1050116 is a 10-inch drop forged steel V-Groove wheel with a roller bearing.

VF1050120

VF1050120

Bearing Type:
Roller
Wheel Diameter:
10"
Tread Width:
3"
Capacity:
5000 lbs
View and Build Quote

VF1050120

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF1050120 is a 10-inch drop forged steel V-Groove wheel with a roller bearing.

VF1070120

VF1070120

Bearing Type:
Roller
Wheel Diameter:
10"
Tread Width:
4"
Capacity:
8350 lbs
View and Build Quote

VF1070120

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF1070120 is a 10-inch drop forged steel V-Groove wheel with a roller bearing.

VF1070124

VF1070124

Bearing Type:
Roller
Wheel Diameter:
10"
Tread Width:
4"
Capacity:
8350 lbs
View and Build Quote

VF1070124

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF1070124 is a 10-inch drop forged steel V-Groove wheel with a roller bearing.

VF1070916

VF1070916

Bearing Type:
Tapered Roller
Wheel Diameter:
10"
Tread Width:
4"
Capacity:
10000 lbs
View and Build Quote

VF1070916

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF1070916 is a 10-inch drop forged steel V-Groove wheel with a tapered roller bearing.

VF1070920

VF1070920

Bearing Type:
Tapered Roller
Wheel Diameter:
10"
Tread Width:
4"
Capacity:
10000 lbs
View and Build Quote

VF1070920

VF wheels are machined from drop forged steel wheels. The hot forging process that carbon steel billets undergo to become wheels improves grain flow, enhances ductility and tensile strength. Albion Drop Forged Steel has a tensile strength of 64,000 psi.

VF V-Groove wheels feature a relief groove at the base of the “V”. This helps equalize the load to each face of the track angle when in operation. The wheel face and bore are machines for concentricity to proper tracking. These wheels can be used on any flat surface, but when a track is used, appropriate alignment is critical for proper use.

VF1070920 is a 10-inch drop forged steel V-Groove wheel with a tapered roller bearing.